Light Emitting Diode (LED)


The LED is a light source which uses semiconductors and electroluminescence to create light. There are two major kinds of light emitting diodes: LED and OLED. The LED is different than EL lamp in that it uses a small semiconductor crystal with reflectors and other parts to make the light brighter and focused into a single point. The OLED is very similar to the EL lamp in design, using a flat sandwich of materials. It is different than the LED and EL lamp in that it uses organic (carbon) molecules in the layer that emits light.
Currently the LED lamp is popular due to it’s efficiency and many believe it is a ‘new’ technology. The LED as we know it has been around for over 50 years. The recent development of white LEDs is what has brought it into the public eye as a replacement for other white light sources.


Common uses: indication lights on devices, small and large lamps, traffic lights, large video screens, signs, street lighting
-Energy efficient source of light for short distances and small areas. The typical LED requires only 30-60 milliwatts to operate
-Durable and shockproof unlike glass bulb lamp types
-Directional nature is useful for some applications like reducing stray light pollution on streetlights

-May be unreliable in outside applications with great variations in summer/winter temperatures, more work is being done now to solve this problem
-Semiconductors are sensitive to being damaged by heat, so large heat sinks must be employed to keep powerful arrays cool, sometimes a fan is required. This adds to cost and a fan greatly reduces the energy efficient advantage of LEDs, it is also prone to failure which leads to unit failure
-Circuit board solder and thin copper connections crack when flexed and cause sections of arrays to go out
-Rare earth metals used in LEDs are subject to price control monopolies by certain nations
-Reduced lumen output over time

LEDs create light by electroluminescence in a semiconductor material. Electroluminescence is the phenomenon of a material emitting light when electric current or an electric field is passed through it. this happens when electrons are sent through the material and fill electron holes. An electron hole exists where an atom lacks electrons (negatively charged) and therefore has a positive charge. Semiconductor materials like germanium or silicon can be “doped” to create and control the number of electron holes.

Doping is the adding of other elements to the semiconductor material to change its properties. By doping a semiconductor you can make two separate types of semiconductors in the same crystal. The boundary between the two types is called a p-n junction. The junction only allows current to pass through it one way, this is why they are used as diodes. LEDs are made using p-n junctions. As electrons pass through one crystal to the other they fill electron holes.

Phosphors are used to help filter the light output of the LED. They create a more pure “harsh” color. Engineers had to figure out how to control the angle the light escapes the semiconductor, this “light cone” is very narrow. They figured out how to make light refract or bounce off all surfaces of the semiconductor crystal to intensify the light output. This is why LED displays traditionally have been best viewed from one angle.

  • LED are available in different color and color is depended on the materiel used for the led,led-005
    Red and Infrared LEDs are made with gallium arsenide.
    Bright Blue is made with GaN -gallium nitride.
    White LEDs are made with yttrium aluminum garnet.
    Orange is made with Gallium arsenide phosphide Aluminium gallium indium phosphide Gallium phosphide.
    Yellow is made with Gallium arsenide phosphide Aluminium gallium indium phosphide Gallium phosphide.

If any query or suggestion about LED please comment below or Email on



Please enter your comment!
Please enter your name here